Macro Micro News Global Pulse. Local Truth.

Bit-Accurate FPGA Control: Reliable PV-STATCOM Ride-Through in Weak Grids

09 November 2026 · 2 min read

We compile, generate and translate using Artificial Intelligence from the below given source. Macro Micro News is responsible for its editorial publication.

Article image by Egor Komarov
Image by Egor Komarov

Global, Source:

As renewable energy integration accelerates, the stability of power grids facing voltage sags and weak grid conditions has become a critical engineering challenge. A recent study published in Electronics (MDPI) addresses this by delivering a comprehensive analysis of bit-accurate Field-Programmable Gate Array (FPGA) current control for Photovoltaic Static Synchronous Compensators (PV-STATCOM). This research bridges the gap between theoretical simulation and practical hardware implementation, offering precise quantifications of delay limits and word-length constraints that determine successful low-voltage ride-through (LVRT).

The core innovation lies in a rigorous verification chain that moves from dq-domain simulations to a stationary-frame co-simulation running a bit-accurate fixed-point model, and finally to a VHDL implementation verified in lock-step. The study demonstrates that a Q12.20 fixed-point format (32-bit words with 20 fractional bits) is sufficient to replicate floating-point performance in all tested scenarios. Crucially, the research identifies that 16 fractional bits are the minimum threshold for maintaining identical pass/fail outcomes against floating-point references, providing engineers with a clear guideline for optimizing FPGA resource usage without compromising stability.

One of the most significant findings concerns the relationship between control delay and system stability. The study reveals that as the effective sampling-to-update delay increases from 50 to 350 microseconds, current-step overshoot rises dramatically from 0% to 82%. While the controller remains stable up to 450 microseconds under specific tuning, LVRT metrics degrade noticeably beyond 250 microseconds. The research maps out a 640-case matrix of balanced sags, showing that while systems with a Short Circuit Ratio (SCR) of 6 or higher and retained source voltage above 0.5 pu consistently succeed, 90% of cases with an SCR of 3 or less and voltage below 0.2 pu fail due to overcurrent or DC-link overvoltage.

Furthermore, the investigation into weak-grid interactions highlights a complex oscillation mechanism involving the reactive-current droop loop, voltage estimators, and Phase-Locked Loops (PLL). The study finds that slowing the voltage estimate time constant from 0.5 ms to 4 ms significantly reduces these oscillations, although it does not eliminate them entirely in very weak grids (SCR=2). The implementation on a Xilinx Zynq XC7Z020 FPGA achieved timing closure at 100 MHz with a worst negative slack of +0.219 ns, utilizing only 12% of Look-Up Tables and 30% of DSP slices. The control tick latency was measured at 2.08 microseconds, which is two orders of magnitude lower than the delay thresholds where loop degradation begins.

This work provides a validated blueprint for deploying robust, cost-effective digital controls in distributed energy resources. By proving that bit-accurate models can predict hardware behavior with zero mismatches, the study offers a pathway to safer, more reliable grid support from solar inverters, ensuring that renewable sources can actively stabilize the grid during disturbances rather than merely disconnecting.